{"title":"Back Office \u0026 Facility","description":"\u003cp\u003eThe bar back office is where the cash, the computer and the plant live: the safe for the night's takings, the PC that runs stock and staff rotas, the water heater for the glass wash, the gas detector by the cellar. This zone collects that equipment, plus backup power and floor scrubbers for closing time.\u003c\/p\u003e","products":[{"product_id":"off-grid-hybrid-solar-power-system-kit","title":"Off-Grid Hybrid Solar Power System Kit with LiFePO4 Storage","description":"\u003cp\u003eThis hybrid solar power system gives a hotel, lodge, or off-grid venue its own electricity supply, combining monocrystalline panels, an MPPT charge controller, and a LiFePO4 battery bank into one configurable kit. The hybrid inverter runs loads directly from the array during the day and draws on stored capacity at night or during a grid outage, so guest rooms, kitchens, and service areas stay powered without a diesel generator running.\u003c\/p\u003e\u003cp\u003eThe base configuration centers on a 5kW solar array with 10kWh of lithium storage, and the platform scales across power and capacity tiers to match a site's load profile:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolar array options from 1kW up to 30kW\u003c\/li\u003e\n\u003cli\u003eBattery storage configured at 10kWh or 20kWh\u003c\/li\u003e\n\u003cli\u003eSingle-phase, split-phase, or three-phase inverter to suit local wiring\u003c\/li\u003e\n\u003cli\u003eOutput at 110\/220\/230\/240V, 50\/60Hz\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLithium-ion (LiFePO4) chemistry holds up to deep daily cycling far better than lead-acid, and the roof-mounted panels use an aluminum-alloy and stainless-steel frame built for permanent outdoor installation. The supplier provides pre-sales project design and full technical support, so a property can size the system to its actual consumption before ordering. Contact us to confirm the configuration that matches your daily kWh demand.\u003c\/p\u003e","brand":"BarEquip.Pro","offers":[{"title":"Hybrid Solar System \/ 3 kW","offer_id":44237532037219,"sku":"BEP-0097-02","price":1260.0,"currency_code":"USD","in_stock":true},{"title":"Off-Grid Solar System \/ 3 kW","offer_id":44237532069987,"sku":"BEP-0097-01","price":1260.0,"currency_code":"USD","in_stock":true},{"title":"Hybrid Solar System \/ 5 kW","offer_id":44237532201059,"sku":"BEP-0097-04","price":1512.0,"currency_code":"USD","in_stock":true},{"title":"Off-Grid Solar System \/ 5 kW","offer_id":44237532168291,"sku":"BEP-0097-03","price":1512.0,"currency_code":"USD","in_stock":true},{"title":"Hybrid Solar System \/ 8 kW","offer_id":44237531938915,"sku":"BEP-0097-05","price":1706.0,"currency_code":"USD","in_stock":true},{"title":"Off-Grid Solar System \/ 8 kW","offer_id":44237531906147,"sku":"BEP-0097-06","price":1706.0,"currency_code":"USD","in_stock":true},{"title":"Hybrid Solar System \/ 10 kW","offer_id":44237532135523,"sku":"BEP-0097-08","price":2312.0,"currency_code":"USD","in_stock":true},{"title":"Off-Grid Solar System \/ 10 kW","offer_id":44237532102755,"sku":"BEP-0097-07","price":2312.0,"currency_code":"USD","in_stock":true},{"title":"Hybrid Solar System \/ 20 kW","offer_id":44237532004451,"sku":"BEP-0097-10","price":5120.0,"currency_code":"USD","in_stock":true},{"title":"Off-Grid Solar System \/ 20 kW","offer_id":44237531971683,"sku":"BEP-0097-09","price":5120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/6726\/3843\/files\/95bd34a2-424e-4b35-9abd-d86b6eb038f1.jpg?v=1780683633"},{"product_id":"fireproof-wall-safe-with-electronic-lock-hotel-office","title":"Fireproof Wall Safe with Electronic Lock — Hotel \u0026 Office","description":"\u003cp\u003eThis wall safe gives hotels and offices a discreet place to secure cash, passports and small valuables. The cold-rolled steel body carries a 4 mm door and a 1.5 mm shell, with a double-bolt mechanism that resists prying and a fireproof build to protect contents from heat. At 42 × 37 × 20 cm with a single interior partition, it recesses into a wall cavity so guests or staff can lock away items out of sight.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eElectronic keypad with LCD display, plus an override key lock for lockout recovery\u003c\/li\u003e\n\u003cli\u003eDouble-bolt locking into a 4 mm steel door\u003c\/li\u003e\n\u003cli\u003eCold-rolled steel construction, wall-mount installation\u003c\/li\u003e\n\u003cli\u003eOne interior partition for organizing documents and cash\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCertified to CE and EMC standards, it suits guest rooms, front-desk drops and office back-of-house where a compact, hidden safe matters more than floor space.\u003c\/p\u003e","brand":"BarEquip.Pro","offers":[{"title":"Default Title","offer_id":44384050970723,"sku":"BEP-0202","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/6726\/3843\/files\/5cd6c9b7-5f19-4dfe-81b6-490516815854.jpg?v=1784648254"},{"product_id":"digital-security-safe-electronic-keypad-key-lock","title":"Digital Security Safe — Electronic Keypad \u0026 Key Lock","description":"\u003cp\u003eThis electronic security safe gives a hotel, office, or bank branch a reliable place to lock away cash, jewelry, passports, and small valuables. The alloy steel body and dual-access design — an electronic digital keypad plus a physical backup key — keep contents secure while letting staff or guests open it quickly, even if the code is forgotten. At H350 × W380 × D300 mm, it holds documents, cash boxes, and small electronics, and can be free-standing or wall-mounted to suit a reception desk, back office, or guest room.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eElectronic digital keypad with backup key lock\u003c\/li\u003e\n\u003cli\u003eAlloy steel construction for tamper resistance\u003c\/li\u003e\n\u003cli\u003eFree-standing or wall-mounted installation\u003c\/li\u003e\n\u003cli\u003eSuited to home, hotel, office, and bank use\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCustomization covers panel type, handle, size, thickness, color, interior fit-out, and brand logo, so hospitality operators can match the safe to a room spec or roll it out across a property.\u003c\/p\u003e","brand":"BarEquip.Pro","offers":[{"title":"Default Title","offer_id":44401984012387,"sku":"BEP-0203","price":98.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/6726\/3843\/files\/6c9253d0-03ac-49bb-b3c6-dfb1ec2508d5.jpg?v=1784913597"},{"product_id":"solar-powered-walk-in-cold-storage-room-off-grid","title":"Solar-Powered Walk-In Cold Storage Room — Off-Grid","description":"\u003cp\u003eThis is a solar-powered walk-in cold storage room built for venues that need reliable refrigeration without leaning entirely on the grid — remote sites, off-grid kitchens, farms, and operations chasing lower energy bills. The base unit measures roughly 3 × 2 × 2.2 m and pairs an integrated solar panel array with a branded compressor (Bitzer, Copeland, or Sanyo depending on the build) running R-410A refrigerant.\u003c\/p\u003e\u003cp\u003eTemperature range is the main choice you make: variants cover chilled holding through deep-freeze, so the same room can be specified for produce, dairy, and beverages or for frozen stock at -35 °C. Insulated PU panels come in three thicknesses — 100, 120, and 150 mm — with thicker panels holding colder set-points more efficiently.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOff-grid solar operation to cut electricity costs and reach sites with no mains supply\u003c\/li\u003e\n\u003cli\u003eRemote control and monitoring, so staff can check the room temperature from a distance\u003c\/li\u003e\n\u003cli\u003eSingle- or double-door layouts, available in 220 V and 380 V configurations\u003c\/li\u003e\n\u003cli\u003eCustom builds supported; a machinery test report and outgoing video inspection are provided\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBacked by a 1-year manufacturer warranty.\u003c\/p\u003e","brand":"BarEquip.Pro","offers":[{"title":"Default Title","offer_id":44434189025379,"sku":"BEP-0328-20","price":8600.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/6726\/3843\/files\/8d552d50-9195-45ab-ae6e-3e7fcec5a69f.jpg?v=1785745912"},{"product_id":"commercial-diesel-generator-set-silent-open-10-15-kw","title":"Commercial Diesel Generator Set — Silent\/Open, 10–15 kW","description":"\u003cp\u003eThis diesel generator set delivers reliable standby and prime power for food trucks, mobile catering, outdoor events, and backup at bars and restaurants. It pairs a water-cooled diesel engine with a brushless self-excited alternator, running at 1500\/1800 RPM to supply clean 50\/60 Hz output in single- or three-phase configurations. Rated power spans 10–15 kW, so you can match the unit to a coffee cart, a full kitchen trailer, or a venue that needs to ride out grid outages.\u003c\/p\u003e\u003cp\u003eAn LCD digital control panel handles monitoring and start-up, with automatic voltage regulation keeping output steady for sensitive electronics and kitchen equipment. Built-in protection covers overload, low-oil shutdown, and under-voltage, while the corrosion-resistant radiator and thickened steel underframe stand up to outdoor duty. The silent canopy uses high-density sound-absorbing cotton to bring noise down to roughly 70–90 dB.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWater-cooled diesel engine, 1500\/1800 RPM at 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eBrushless self-excited alternator with 100% copper windings\u003c\/li\u003e\n\u003cli\u003eMultiple start options: auto, remote, and 12V\/24V DC electric start\u003c\/li\u003e\n\u003cli\u003eOpen, silent canopy, trailer, and containerized configurations available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BarEquip.Pro","offers":[{"title":"Default Title","offer_id":44434850119779,"sku":"BEP-0480-03","price":3873.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/6726\/3843\/files\/1afb42b1-3de4-4082-9978-0de8d6aba299.jpg?v=1785775409"},{"product_id":"solar-power-system-off-grid-hybrid-on-grid-1-10-kw","title":"Solar Power System — Off-Grid, Hybrid \u0026 On-Grid (1–10 kW)","description":"\u003cp\u003eThis is a complete solar power system built as one ground-mounted unit: monocrystalline photovoltaic panels sit on a tilted frame on top of a weatherproof cabinet, and the cabinet houses the lithium-ion battery bank and the MPPT\/PWM charge controller. It supplies steady power to venues, telecom sites and industrial loads where grid supply is absent, unreliable or expensive to run — a bar patio, a remote lodge, a back-of-house cold room or an outdoor event site. The cabinet takes a 380 Vac three-phase, five-wire input and carries Class C lightning protection rated at a nominal 20 kA, so it holds up in exposed, real-world installations.\u003c\/p\u003e\u003cp\u003eThe system is offered in three architectures and a range of power ratings, so you match it to how the site draws power:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOff-grid\u003c\/strong\u003e — panels and battery run the load with no utility connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid\u003c\/strong\u003e — solar, battery and grid work together, with the grid as backup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn-grid\u003c\/strong\u003e — the system feeds alongside utility supply.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRatings span 1, 3, 5, 6, 8 and 10 kW, with custom configurations available on request. The enclosure is rated IP65 for outdoor and ground-mounted installation, and the manufacturer provides pre-sales project design so the panel count, battery capacity and controller are sized to your load before you commit.\u003c\/p\u003e","brand":"BarEquip.Pro","offers":[{"title":"Default Title","offer_id":44446616584291,"sku":"BEP-0469-09","price":4200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/6726\/3843\/files\/be196e09-2f14-4fe9-933d-f07f110dfbfe.jpg?v=1785945199"},{"product_id":"portable-solar-power-station-3000w-5376wh-lifepo4","title":"Portable Solar Power Station — 3000W, 5376Wh LiFePO4","description":"\u003cp\u003eThis portable solar power station gives a venue a silent, fuel-free source of backup and off-grid power. Its 3000W pure sine wave inverter runs sensitive equipment cleanly — POS terminals, refrigeration, coffee gear, lighting, and audio — while the 5376Wh LiFePO4 battery bank holds enough charge to bridge an outage or run a remote pop-up bar, market stall, or outdoor event where mains power isn't available. Unlike a fuel generator, it produces no exhaust, no noise, and no fumes, so it can sit indoors or right beside guests.\u003c\/p\u003e\u003cp\u003eAn MPPT charge controller tracks the panels' peak output and lifts solar conversion efficiency by 20–30%, staying productive even in cloudy or low-light conditions. Three charging paths — solar, AC wall, and car — keep the unit topped up wherever the day takes it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAutomotive-grade LiFePO4 cells rated for 4000 charge cycles, with over 70% capacity retained after 8–10 years of use.\u003c\/li\u003e\n\u003cli\u003eFull battery management: overcharge, over-discharge, short-circuit, over-temperature, and over-current protection.\u003c\/li\u003e\n\u003cli\u003e110V\/220V AC output, plus USB, Type-C, wireless charging, an RV port, and a jump-starter function.\u003c\/li\u003e\n\u003cli\u003eCertified to CE, FCC, RoHS, UN38.3, MSDS, and PSE for global deployment.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BarEquip.Pro","offers":[{"title":"Default Title","offer_id":44446625628259,"sku":"BEP-0471-01","price":2388.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/6726\/3843\/files\/ed039674-feea-4a7f-afce-b33c2eda35f6.png?v=1785945497"},{"product_id":"all-in-one-12kw-power-station-with-mppt-controller","title":"12 kW Portable Power Station — 7.68 kWh LiFePO4, 24 kW in Parallel","description":"\u003cp\u003eThe EP12000iL is an all-in-one power station that puts the inverter, a 1,200 W MPPT solar charge controller and a 7,680 Wh LiFePO4 battery into one wheeled cabinet. It delivers 12 kVA on a three-phase 220–415 V supply (11 kVA single-phase, 10 kVA split-phase) with a pure sine wave, and peaks at 24 kVA for motor starts — enough to carry a bar, café kitchen or small production line through an outage, or to run an event site with no grid at all.\u003c\/p\u003e\u003cp\u003eTwo units join in parallel without an extra kit for 24 kW of AC output and double the stored energy, and an EP12000B extra battery adds another 7,680 Wh. Transfer time is 10 ms or less, so connected equipment rides through a mains failure. Charging is flexible:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAC mains up to 7,000 W — about 70 minutes to full on a three-phase supply\u003c\/li\u003e\n\u003cli\u003eBuilt-in 1,200 W MPPT solar input (12–150 V DC), with high-voltage solar, wind, EV-charger and driving charging as options\u003c\/li\u003e\n\u003cli\u003eLiFePO4 battery, 150 Ah at 51.2 V, rated for 3,000 cycles to 80% capacity\u003c\/li\u003e\n\u003cli\u003eOutputs for small devices too: two USB-A, two QC3.0, two 140 W USB-C and 2 × 15 W wireless charging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe cabinet measures 840 × 670 × 490 mm and weighs 100 kg, with wheels and a pull handle, and it is monitored from an LCD panel or over Wi-Fi in the app. It discharges from −20 to 50 °C and charges from 0 to 45 °C.\u003c\/p\u003e","brand":"BarEquip.Pro","offers":[{"title":"Default Title","offer_id":44446726881379,"sku":"BEP-0474-01","price":7225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/6726\/3843\/files\/67dd89a0-fd42-49f2-be25-0e9f69e2e24b.jpg?v=1785948493"},{"product_id":"portable-power-station-2048wh-lifepo4-solar-generator","title":"Portable Power Station — 2048–10240Wh LiFePO4 Solar Generator","description":"\u003cp\u003eThis is a family of portable power stations built around automotive-grade LiFePO4 cells, spanning 2048–10240Wh so venues and mobile operators can match capacity to the job — from a pop-up bar to a full off-grid setup. Every model recharges to 80% in about 60 minutes on 1800W AC fast charging, or runs off solar for off-grid work: two XT90 PV inputs accept up to 1200W (600W each), compatible with two 400W or six 200W panels. Combined AC and solar charging reaches up to 2500W.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAutomotive LFP cells rated for 4000+ cycles — around 25% longer service life than conventional LFP\u003c\/li\u003e\n\u003cli\u003eAC output: 4× 110V + one industrial outlet, or 3× 220V for UK\/EU markets\u003c\/li\u003e\n\u003cli\u003eDC outputs: 12V\/25A XT60, 12V\/10A cigarette-lighter socket, 2× USB-A (5V\/2.4A)\u003c\/li\u003e\n\u003cli\u003eDual XT90 PV inputs plus a 30A RV socket to cover a motorhome's electrical load\u003c\/li\u003e\n\u003cli\u003eUPS-capable with an LCD status display and Smart App monitoring and control\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMeasured at a distance of 50 cm, the unit runs at just 30 dB — quiet enough to keep indoors during service, on outdoor stalls, or at pop-up events without disturbing guests. OEM\/ODM configurations are available.\u003c\/p\u003e","brand":"BarEquip.Pro","offers":[{"title":"2048 Wh","offer_id":44446748573795,"sku":"BEP-0475-01","price":975.0,"currency_code":"USD","in_stock":true},{"title":"4096 Wh","offer_id":44446748606563,"sku":null,"price":1575.0,"currency_code":"USD","in_stock":true},{"title":"6144 Wh","offer_id":44446748639331,"sku":null,"price":2175.0,"currency_code":"USD","in_stock":true},{"title":"8192 Wh","offer_id":44446748672099,"sku":null,"price":2775.0,"currency_code":"USD","in_stock":true},{"title":"10240 Wh","offer_id":44446748704867,"sku":null,"price":3375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/6726\/3843\/files\/949f9eeb-e5d5-4441-9f8b-4d5cb5453795.png?v=1785949712"},{"product_id":"mobile-solar-power-trailer-5-kwh-off-grid-storage","title":"Mobile Solar Power Trailer — 5 kWh Off-Grid Storage","description":"\u003cp\u003eThe mobile solar power trailer packs monocrystalline panels, a lithium-ion battery bank and an MPPT charge controller onto a towable base, giving a work site clean off-grid power without a fuel line or a grid tie. Its 5 kWh of storage runs cameras, floodlights and small industrial tools through a full 24-hour cycle, with the panels topping up the bank through the day — useful where mains power is far away or not yet installed.\u003c\/p\u003e\u003cp\u003eBuilt for crews that move between locations, the trailer rolls to wherever the load is: a construction perimeter, an event field, a temporary security post or a lighting run. The AC output covers 110 V and 240 V at 50\/60 Hz, so it feeds standard tools and fixtures directly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e5 kWh lithium-ion storage for around-the-clock operation\u003c\/li\u003e\n\u003cli\u003eMonocrystalline silicon panels for efficient harvesting in remote spots\u003c\/li\u003e\n\u003cli\u003eMPPT controller for maximum charge from available sunlight\u003c\/li\u003e\n\u003cli\u003e110 V \/ 240 V AC output at 50\/60 Hz for standard equipment\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BarEquip.Pro","offers":[{"title":"Default Title","offer_id":44446810964067,"sku":"BEP-0487","price":5208.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/6726\/3843\/files\/d4ec28da-c6c8-4f0d-990c-ee3c928f5545.jpg?v=1785952106"},{"product_id":"smart-sunflower-solar-tracking-system-mppt-battery-inverter","title":"Smart Sunflower Solar Tracking System — MPPT, Battery \u0026 Inverter","description":"\u003cp\u003eThe Smart Sunflower is a ground-mounted photovoltaic system that turns a patch of open ground into on-site power for a venue, farm or remote site. Its sunflower-style tracking mount pivots the monocrystalline panels to follow the sun across the day, so the array captures more energy than a fixed panel of the same rating. An MPPT charge controller feeds a lithium-ion battery bank, and the built-in inverter delivers 220V\/110V at 50Hz\/60Hz to run standard equipment.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSun-tracking mount for higher daily yield than a fixed array\u003c\/li\u003e\n\u003cli\u003eMPPT charge controller for efficient panel-to-battery conversion\u003c\/li\u003e\n\u003cli\u003eLithium-ion battery storage for 24-hour supply, day and night\u003c\/li\u003e\n\u003cli\u003eConfigurable from 1 kW to 50 kW to match the load\u003c\/li\u003e\n\u003cli\u003eAvailable as off-grid, hybrid or on-grid configurations\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eChoose off-grid to run independently, hybrid to blend solar with the grid or a generator, or on-grid to feed back to the utility. Pre-sales project design and installation support are offered to size the system to a site's load. Contact us to confirm panel count, battery capacity and tracking specification for your chosen power rating.\u003c\/p\u003e","brand":"BarEquip.Pro","offers":[{"title":"Default Title","offer_id":44462523154531,"sku":"BEP-0636-01","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/6726\/3843\/files\/5c68486b-166a-466b-9ff1-01e214497c4c.jpg?v=1786397047"},{"product_id":"off-grid-solar-flower-power-station-full-home-kit","title":"Off-Grid Solar Flower Power Station — Full Home Kit","description":"\u003cp\u003eThe Off-Grid Solar Flower Power Station is a ground-mounted photovoltaic kit that generates and stores electricity independent of the utility grid, wrapped in a flower-shaped aluminum frame that reads as landscaping rather than hardware. It suits venues that want visible sustainability at an entrance, garden, patio or open yard — a hotel forecourt, a resort pathway, an outdoor bar terrace — while quietly powering lighting, small appliances or charging points.\u003c\/p\u003e\u003cp\u003eEach kit pairs monocrystalline silicon panels with an MPPT charge controller that tracks the panels' peak output as sun and temperature shift, and a pure sine wave inverter that delivers clean 230 VAC power suitable for sensitive electronics. The aluminum column and mounting system carry a wind rating of 27 m\/s (Level 10) and operate across a −40 °C to 50 °C range, so the station holds up through storms and seasonal extremes.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutput: 230 VAC ± 5%, 50\/60 Hz pure sine wave\u003c\/li\u003e\n\u003cli\u003eMPPT charge controller for higher yield in variable light\u003c\/li\u003e\n\u003cli\u003eMonocrystalline panels on an aluminum ground-mount frame\u003c\/li\u003e\n\u003cli\u003eWind rating 27 m\/s (Level 10); operating range −40 °C to 50 °C\u003c\/li\u003e\n\u003cli\u003eFootprint roughly 3 m × 3 m × 3 m\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBecause sizing depends on your climate and daily load, the manufacturer offers pre-sales project design — share your location, average daily kilowatt-hours and site details, and the system can be matched to your demand.\u003c\/p\u003e","brand":"BarEquip.Pro","offers":[{"title":"Default Title","offer_id":44465579032675,"sku":"BEP-0637-03","price":2200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/6726\/3843\/files\/8720b92e-9070-4d22-b050-6a773e90b284.jpg?v=1786397105"},{"product_id":"walk-behind-battery-floor-scrubber-dryer-430-mm","title":"Walk-Behind Battery Floor Scrubber Dryer — 430 mm","description":"\u003cp\u003eA walk-behind battery floor scrubber dryer scrubs, collects and dries a hard floor in a single pass, so a shop or lobby is walkable again the moment it clears the machine. This model runs on a 36 V battery with one-button operation, covers up to 1,000 m² per hour across a 430 mm cleaning width, and works untethered — no trailing cord across a busy retail floor. It suits venues that need daily maintenance cleaning without a full ride-on machine: convenience stores, pharmacies, cafes and bars, bank lobbies, cinemas, museums, fitness studios and catering kitchens.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e430 mm cleaning path with a 21 cm brush plate\u003c\/li\u003e\n\u003cli\u003e4 L clean-water tank and 6.5 L recovery tank\u003c\/li\u003e\n\u003cli\u003e1–2 hour runtime per charge on the 36 V battery\u003c\/li\u003e\n\u003cli\u003eCold-water scrubbing with squeegee pickup for a dry finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAt 17 kg it is light enough to maneuver in tight aisles and around fixtures, and color customization is available for operators who want the machine to match a fleet or brand. Backed by a 1-year manufacturer warranty.\u003c\/p\u003e","brand":"BarEquip.Pro","offers":[{"title":"Default Title","offer_id":44638881742947,"sku":"BEP-0730-01","price":1100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/6726\/3843\/files\/ada368d7-5c3c-484c-94bf-4c8e471133e8.png?v=1789722374"},{"product_id":"tankless-electric-instant-water-heater-8500-w-touch-control","title":"Tankless Electric Instant Water Heater — 8500 W, Touch Control","description":"\u003cp\u003eThis tankless electric water heater delivers hot water on demand at the point of use, so a hotel bathroom, staff shower or utility sink gets heated water within seconds of the tap opening — no storage tank to keep warm, no standby losses. It mounts on the wall and runs on a single-phase supply between 100 and 240 V, drawing up to 8500 W for fast heating.\u003c\/p\u003e\u003cp\u003eThe heating core is a cast-aluminum body paired with a stainless-steel element, and a touch panel with an LED screen sets and shows the outlet temperature. Overheating protection and an IPX4 splash rating suit it to a wet bathroom environment.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInstant, tankless heating — no tank to store or reheat\u003c\/li\u003e\n\u003cli\u003eUp to 8500 W across a 100–240 V single-phase supply\u003c\/li\u003e\n\u003cli\u003eCast-aluminum heating body with a stainless-steel element\u003c\/li\u003e\n\u003cli\u003eTouch control panel with LED temperature display\u003c\/li\u003e\n\u003cli\u003eWall-mounted, IPX4-rated, with overheating protection\u003c\/li\u003e\n\u003cli\u003eClass A energy efficiency rating; supplied with a 6 mm² power cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BarEquip.Pro","offers":[{"title":"Default Title","offer_id":67589404000355,"sku":"BEP-0743","price":114.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/6726\/3843\/files\/b43e2302-7efe-44c1-967d-ab1a00171e43.png?v=1790618894"},{"product_id":"instant-electric-tankless-water-heater-touch-control","title":"Instant Electric Tankless Water Heater — Touch Control","description":"\u003cp\u003eAn instant electric water heater sized for point-of-use hot water where a storage tank isn't practical — apartment bathrooms, staff washrooms and compact service areas. Water heats as it passes through the stainless-steel element, so there's no reheating a tank and no standby loss between uses. Power ratings run from 3.5 kW to 7 kW across the range, letting you match the unit to the incoming water temperature and the flow the fixture needs.\u003c\/p\u003e\u003cp\u003eThe heater mounts on the wall and reads its current temperature on an LED display, with touch control and a remote for adjusting the setpoint. The housing carries an IPX4 rating against splashing, suitable for a shower or basin position.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTankless, on-demand heating — hot water only while the tap runs\u003c\/li\u003e\n\u003cli\u003ePower options from 3.5 kW to 7 kW\u003c\/li\u003e\n\u003cli\u003eStainless-steel heating element\u003c\/li\u003e\n\u003cli\u003eTouch control with LED temperature display and remote\u003c\/li\u003e\n\u003cli\u003eWall-mounted, IPX4-rated housing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BarEquip.Pro","offers":[{"title":"Black","offer_id":67616181846115,"sku":"BEP-0742-04","price":82.0,"currency_code":"USD","in_stock":true},{"title":"Dark violet","offer_id":67616181878883,"sku":"BEP-0742-01","price":82.0,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":67616181780579,"sku":"BEP-0742-02","price":82.0,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":67616181813347,"sku":"BEP-0742-03","price":82.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/6726\/3843\/files\/3df11ea0-5674-44a2-9bb6-a734bcfe8f16.jpg?v=1790851077"},{"product_id":"instant-tankless-electric-water-heater-7-kw-wifi-app-control","title":"Instant Tankless Electric Water Heater — 7 kW WiFi App Control","description":"\u003cp\u003eThis instant electric water heater gives a venue point-of-use hot water without a storage tank — it heats water only as it flows, so there is no reheat cycle and no standby loss on a bathroom, kitchenette or service point. The 7 kW stainless-steel heating element brings cold water up to temperature within seconds, and constant-temperature control holds the setpoint even as flow changes, which matters for guest showers and hand-wash stations where a swing in temperature is immediately noticed.\u003c\/p\u003e\u003cp\u003eThe wall-mounted plastic housing carries an IPX4 splash rating and an LED display, with both touch control on the unit and a WiFi app for remote setting. It suits properties fitting out rooms one at a time or retrofitting a service area where running a central hot-water loop is not practical.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e7 kW on-demand heating, no storage tank\u003c\/li\u003e\n\u003cli\u003eConstant-temperature output with overheat protection\u003c\/li\u003e\n\u003cli\u003eTouch panel plus WiFi app control, LED temperature display\u003c\/li\u003e\n\u003cli\u003eIPX4 splash resistance for wet installations\u003c\/li\u003e\n\u003cli\u003eAvailable in white and black\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BarEquip.Pro","offers":[{"title":"Black","offer_id":67616185385059,"sku":"BEP-0744-02","price":93.0,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":67616185417827,"sku":"BEP-0744-01","price":93.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/6726\/3843\/files\/ab4dcd89-d3b7-402b-b2fb-aa210af7f020.jpg?v=1790851121"},{"product_id":"electric-storage-water-heater-enamel-tank-10-100-l","title":"Electric Storage Water Heater — Enamel Tank, 10–100 L","description":"\u003cp\u003eThis is a wall-mounted electric storage water heater built for venues that need steady hot water on tap — hotel bathrooms, staff washrooms, kitchen sinks, and mixed-use sites from garages to RV hookups. It holds water in an enamel inner tank and reheats on demand, so the fixture it feeds gets a consistent supply without a separate boiler room. The range spans 10 to 100 liters, letting you match tank size to how many outlets and how much draw each installation carries.\u003c\/p\u003e\u003cp\u003eHeating runs through a dual-tube element that can work one tube at a time for lighter loads or both for faster recovery, and the temperature control holds output within a tight band once the tank is up to temperature. A fluorine-free polyurethane foam layer keeps stored water hot between draws, which cuts how often the element cycles back on.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnamel inner tank, wall-mounted plastic housing\u003c\/li\u003e\n\u003cli\u003ePower rated 1600 W or 2200 W depending on tank size\u003c\/li\u003e\n\u003cli\u003eClass A energy efficiency rating\u003c\/li\u003e\n\u003cli\u003eT\u0026amp;P pressure relief valve, anti-dry-burn cut-off, and three-pole power cut-off for poorly grounded buildings\u003c\/li\u003e\n\u003cli\u003e80 °C pasteurization cycle and anti-scaling function\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BarEquip.Pro","offers":[{"title":"Default Title","offer_id":67616191545443,"sku":"BEP-0745","price":111.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/6726\/3843\/files\/87841450-7383-4bb8-bf21-cd5303197ffe.png?v=1790851219"},{"product_id":"fixed-industrial-gas-detector-wall-mounted-point-monitor","title":"Fixed Industrial Gas Detector — Wall-Mounted Point Monitor","description":"\u003cp\u003eA fixed gas detector is a permanently mounted point monitor that watches one target gas at a set location and signals a controller the moment concentration climbs past a safe threshold. This unit mounts to a wall or structure, draws from a 3.6 V rechargeable Li-ion battery, and sends its reading to a gas control panel over a 4–20 mA or RS485 output, so a plant can tie several detectors into one centralized monitoring system.\u003c\/p\u003e\u003cp\u003eIt suits any space where a hazardous gas can collect — refineries, chemical plants, LPG filling stations, boiler rooms and paint shops. Each detector is configured for a single gas, so you order the variant that matches the hazard you're monitoring:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCombustible\/flammable gas (EX) and hydrogen (H2)\u003c\/li\u003e\n\u003cli\u003eToxic gases: carbon monoxide (CO), hydrogen sulfide (H2S), ammonia (NH3), chlorine (CL2), hydrogen chloride (HCL), hydrogen cyanide (HCN), phosphine (PH3), ozone (O3)\u003c\/li\u003e\n\u003cli\u003eOxygen (O2) and carbon dioxide (CO2)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAlarm output depends on the option you pick, from a basic point unit to a version with an LED display and a combined sound-and-light alarm. The housing is waterproof and ABS-built, and the device ships with SIL, CE and RoHS compliance plus a Declaration of Conformity.\u003c\/p\u003e","brand":"BarEquip.Pro","offers":[{"title":"Default Title","offer_id":67911546667107,"sku":"BEP-0838-25","price":1197.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/6726\/3843\/files\/e3515707-ac0c-488d-a8c6-aabb2244af50.jpg?v=1794474191"},{"product_id":"fixed-industrial-gas-detector-multi-gas-h2s-ch4-lpg-co-o2","title":"Fixed Industrial Gas Detector — Multi-Gas (H2S, CH4, LPG, CO, O2, Cl2)","description":"\u003cp\u003eThis fixed gas detector mounts to a wall in a kitchen, plant room or process area and watches the air for combustible and toxic gases — H2S, methane (CH4), LPG, carbon monoxide (CO), chlorine (Cl2), oxygen depletion (O2), VOCs, CO2 and refrigerants among them. When a reading crosses its alarm point it drives a built-in siren and switches any of three on-board relays, so it can trip an extractor, cut a gas valve or signal a BMS without extra hardware.\u003c\/p\u003e\u003cp\u003eIt runs on a 24 V DC supply drawing under 3 W and reports over a 4–20 mA loop or RS485 power bus, which drops it straight into most control systems. Sampling is by natural diffusion, so there is no pump to service, and the IP66\/IP67 stainless-steel and aluminum housing stands up to washdown and dust. An infrared remote lets a technician check parameters and recalibrate without opening the enclosure.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCatalytic, electrochemical and infrared sensor options cover flammable, toxic and CO2\/refrigerant gases\u003c\/li\u003e\n\u003cli\u003eFast response: T90 ≤20s for flammable gases, ≤30s for O2\/CO\/H2S, ≤60s for others\u003c\/li\u003e\n\u003cli\u003eThree relays plus 4–20 mA or RS485 output for valves, fans and alarm panels\u003c\/li\u003e\n\u003cli\u003eIECEx and ATEX certified for hazardous-area installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BarEquip.Pro","offers":[{"title":"Default Title","offer_id":67913051471971,"sku":"BEP-0849","price":345.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/6726\/3843\/files\/6fe65627-312b-436e-aef7-fabe5fe8715e.png?v=1794489550"}],"url":"https:\/\/barequip.pro\/collections\/bar-back-office.oembed","provider":"BarEquip.Pro","version":"1.0","type":"link"}