Fixed Industrial Gas Detector — Multi-Gas (H2S, CH4, LPG, CO, O2, Cl2)

Wall-mounted multi-gas detector that monitors combustible and toxic gases with a siren alarm and three relays for industrial control systems.

11,908.00 ฿
Frete calculado à parte
Prazo de entrega: 2–4 semanas

MOQ: 10

This fixed gas detector mounts to a wall in a kitchen, plant room or process area and watches the air for combustible and toxic gases — H2S, methane (CH4), LPG, carbon monoxide (CO), chlorine (Cl2), oxygen depletion (O2), VOCs, CO2 and refrigerants among them. When a reading crosses its alarm point it drives a built-in siren and switches any of three on-board relays, so it can trip an extractor, cut a gas valve or signal a BMS without extra hardware.

It runs on a 24 V DC supply drawing under 3 W and reports over a 4–20 mA loop or RS485 power bus, which drops it straight into most control systems. Sampling is by natural diffusion, so there is no pump to service, and the IP66/IP67 stainless-steel and aluminum housing stands up to washdown and dust. An infrared remote lets a technician check parameters and recalibrate without opening the enclosure.

  • Catalytic, electrochemical and infrared sensor options cover flammable, toxic and CO2/refrigerant gases
  • Fast response: T90 ≤20s for flammable gases, ≤30s for O2/CO/H2S, ≤60s for others
  • Three relays plus 4–20 mA or RS485 output for valves, fans and alarm panels
  • IECEx and ATEX certified for hazardous-area installation

Ficha técnica

Material
Stainless Steel, Aluminum Alloy
Potência
3 W
Tensão
DC 24V ±6V
Garantia
1 Year
Certificações
IECEx, ATEX
Personalização
OEM, ODM
Model
GTQ-BS03
Target gases
Combustible gas, toxic gas, O2, VOC, CO2, Freon (H2S, CH4, LPG, CO, Cl2)
Sensor type
Catalytic, electrochemical, infrared
Sampling method
Natural diffusion
Alarm mode
Siren
Relays
3
Signal output
4-20mA or RS485 power bus
Response time (flammable)
T90 ≤20 s
Response time (O2/CO/H2S)
T90 ≤30 s
Response time (other gases)
T90 ≤60 s
Alarm deviation
±3% of alarm points
Ingress protection
IP66/IP67
Accuracy class
Standard accuracy
Remote control
Infrared

Perguntas frequentes

Which gases does this fixed detector monitor?

Depending on the sensor fitted, it detects combustible and toxic gases including hydrogen sulfide (H2S), methane (CH4), LPG, carbon monoxide (CO), chlorine (Cl2) and oxygen (O2), plus VOCs, CO2 and refrigerants. Specify the target gas when ordering so the right catalytic, electrochemical or infrared sensor is installed.

How does the detector connect to a control system?

It outputs a standard 4–20 mA current loop or communicates over an RS485 power bus, and carries three on-board relays. The relays can trip an extractor fan, close a solenoid gas valve or signal a building management system directly, while the built-in siren alerts staff on site.

Can it be installed in a hazardous area?

Yes. The unit is IECEx and ATEX certified and housed in a stainless-steel and aluminum enclosure rated IP66/IP67 against dust and water jets, so it suits washdown kitchens, plant rooms and demanding industrial environments.

What power supply does the detector need?

It runs on 24 V DC (±6 V) and draws no more than 3 W. Sampling is by natural diffusion, so there is no pump to power or maintain.

How is the detector calibrated?

An infrared remote control lets a technician check parameters and recalibrate the detector without opening the housing, which keeps the enclosure's IP66/IP67 seal intact during routine service.

How fast does it respond to a leak?

Response time is T90 ≤20 seconds for flammable gases, ≤30 seconds for oxygen, CO and H2S, and ≤60 seconds for other gases, with an alarm deviation of ±3% of the set alarm points.

O frete está incluído no preço?

Nos itens em estoque, ou seja, tudo o que dá para adicionar à especificação, o frete já está no preço anunciado. Nos itens feitos sob encomenda, a entrega é grátis (isso aparece na página do produto) ou calculada no pedido, conforme o destino e o volume.

Quanto tempo leva a entrega?

Um item em estoque costuma chegar em uma a três semanas; um item sob encomenda leva de três a seis, porque trabalhamos direto com os fabricantes e a produção e a logística precisam de tempo antes do envio. Depois do pedido, o gerente responsável pela sua conta confirma um prazo mais preciso. Atrasos no desembaraço aduaneiro do país de destino não são de nossa responsabilidade.

Os impostos e taxas de importação estão incluídos?

Na maioria dos casos, sim. Enviamos de preferência no regime DDP (Delivered Duty Paid): os impostos e as taxas de importação já ficam resolvidos e você não paga nada a mais na entrega. Em casos raros o envio pode ser DDU (Delivered Duty Unpaid), e aí você acerta as taxas de importação direto com a transportadora, mas só se isso tiver sido combinado com você antes.

Os produtos têm garantia?

Sim. A maioria dos equipamentos tem garantia do fabricante de um a dois anos contra defeitos de fábrica e falhas técnicas em uso normal, e o prazo exato está na página de cada produto. Se aparecer um defeito, providenciamos a troca ou o reembolso conforme a nossa Política de trocas e devoluções, e a nossa equipe acompanha você em cada etapa da solicitação.

Solicitar orçamento