Facial Recognition Time Attendance Camera System — IP66 Outdoor

Weatherproof AI face-recognition terminal that logs employee clock-ins outdoors and runs access control from ready-made software.

A partir de16,894.00 ฿
Tailândia (THB)

Alterar moeda

A moeda dos preços depende do país. Escolha um país para trocá-la.

Pedido personalizado
Feito sob medida para os seus requisitos. Você escolhe o tamanho e a configuração.

MOQ: 2

This is a face-recognition time and attendance terminal built for the entrance of a venue, not the back office. It reads faces at the door, matches each one against an onboard list and writes a timestamped clock-in or clock-out record, so a bar, kitchen or production floor can track who is on shift without cards, PINs or a supervisor at the desk. An IP66 rating means it mounts outside at a gate or service entrance and keeps working through rain and washdown.

The terminal holds a 10,000-person name list and 70,000 snapshot records on board, and it can detect and capture up to 32 faces at once — enough to clear a shift change without a queue. A 1/3" CMOS sensor feeds up to 2560×1440 video with 2D/3D noise reduction, and the unit carries a built-in mic and speaker for voice prompts and alarm playback. It connects over TCP/IP, RJ45 Ethernet or RS485, takes an SD card up to 256 GB for local recording, and ships with background software plus an API/SDK so an integrator can tie it into payroll, access control or a cloud dashboard.

  • IP66 housing rated for outdoor and washdown-area installation
  • Face capture, tracking, de-duplication and mask detection
  • Area-intrusion, tripwire and head-count behavior analysis for door security
  • Alarm I/O, motion and video-block alarms with sound-and-light linkage
  • Ready background software plus API/SDK for payroll and access-control integration

Ficha técnica

Dimensões (C × L × A)
85 × 198 × 105 mm
Potência
24 W
Tensão
DC 12V / 2A
Garantia
1-year manufacturer warranty with lifelong technical support
Certificações
FCC, CE
Personalização
Ready background software plus API/SDK for custom integration
Biometric method
Face recognition
Sensor
1/3" CMOS
Max resolution
2560x1440
Name list capacity
10000 people
Snapshot records
70000
Simultaneous detection
32 targets
Protection rating
IP66, outdoor installation
Communication
RS485, TCP/IP, RJ45, audio in
Network interface
1x RJ45, 10/100M adaptive Ethernet
SD card support
Up to 256GB
Alarm interface
1 in / 1 out
Audio
1 RCA input / 1 RCA output, built-in mic and speaker
Noise reduction
2D/3D digital
Behavior analysis
Area invasion, tripwire, head count
Detection features
Face capture, tracking, de-duplication, enhancement, mask detection
Recording modes
Manual, timed, event, alarm

Perguntas frequentes

Does this time attendance terminal work outdoors in the rain?

Yes. The housing carries an IP66 rating and is designed for outdoor installation, so it holds up at an exposed gate or service entrance and through washdown areas. Mount it under a small overhang where you can to shield the lens from direct rain and glare and keep recognition fast.

How many employees can the face recognition system store?

The terminal holds a 10,000-person name list and 70,000 snapshot recognition records on board, and it can detect and capture up to 32 faces at the same time. That headroom clears a full shift change at the door without people queuing to clock in.

What software and connections does the terminal need?

It ships with ready-to-run background software plus an API and SDK, so you can use it out of the box or integrate it with payroll, cloud management or access control. Connect over the 10/100M RJ45 Ethernet port, RS485, and add an SD card up to 256 GB for local recording.

Can it do more than clock employees in and out?

Yes. Alongside attendance it runs behavior analysis — area intrusion, tripwire crossing and head count — plus motion and video-block alarms with sound-and-light linkage, so the same unit works as an entrance security camera. A built-in mic and speaker handle voice prompts and alarm playback.

What voltage does the unit run on?

It runs on DC 12 V / 2 A with a tolerance of -15% to +10%. Plan for a stable 12 V supply at the install point; over longer cable runs, size the power lead so the voltage stays inside that window.

Is there a warranty on the device?

Backed by a 1-year manufacturer warranty, with lifelong technical support for setup and software integration questions.

O frete está incluído no preço?

Nos itens em estoque, ou seja, tudo o que dá para adicionar à especificação, o frete já está no preço anunciado. Nos itens feitos sob encomenda, a entrega é grátis (isso aparece na página do produto) ou calculada no pedido, conforme o destino e o volume.

Quanto tempo leva a entrega?

Um item em estoque costuma chegar em uma a três semanas; um item sob encomenda leva de três a seis, porque trabalhamos direto com os fabricantes e a produção e a logística precisam de tempo antes do envio. Depois do pedido, o gerente responsável pela sua conta confirma um prazo mais preciso. Atrasos no desembaraço aduaneiro do país de destino não são de nossa responsabilidade.

Os impostos e taxas de importação estão incluídos?

Na maioria dos casos, sim. Enviamos de preferência no regime DDP (Delivered Duty Paid): os impostos e as taxas de importação já ficam resolvidos e você não paga nada a mais na entrega. Em casos raros o envio pode ser DDU (Delivered Duty Unpaid), e aí você acerta as taxas de importação direto com a transportadora, mas só se isso tiver sido combinado com você antes.

Os produtos têm garantia?

Sim. A maioria dos equipamentos tem garantia do fabricante de um a dois anos contra defeitos de fábrica e falhas técnicas em uso normal, e o prazo exato está na página de cada produto. Se aparecer um defeito, providenciamos a troca ou o reembolso conforme a nossa Política de trocas e devoluções, e a nossa equipe acompanha você em cada etapa da solicitação.

Solicitar orçamento