All-in-One Commercial Cold Plunge Tub with Built-In Chiller
A freestanding acrylic cold plunge with an integrated chiller, ozone sanitation and self-cleaning filtration — ready to run straight out of the crate.
От133,440.00 ฿
Под заказ
Изготавливается под вашу спецификацию — размер и конфигурацию выбираете вы.
The All-in-One Commercial Cold Plunge Tub is a freestanding recovery bath with the chiller built into the unit, so a gym, spa or recovery studio can place it, fill it and run cold therapy sessions without plumbing in a separate refrigeration pack. The 1 hp chiller pulls water down and holds it at a set temperature, which means staff never add ice or chase the temperature between clients.
Water stays clear between uses because the tub circulates through its own filtration loop and an ozone sanitation system, cutting the daily draining and scrubbing that open ice baths demand. The shell is acrylic over resin, fiber and high-density polyurethane foam, so the water holds its temperature longer and the chiller cycles less often. Patented spray and return ports keep the circulation even across the basin.
Built-in 1 hp chiller — no external refrigeration unit to install
Ozone sanitation plus circulating filtration for low-maintenance water care
Insulated multi-layer acrylic shell rated for indoor or outdoor placement
IPX4 chiller housing for sheltered outdoor installs
Center drain, 15 gpm minimum flow, 24 A / 1 hp power draw
Backed by a 1-year manufacturer warranty against defects in materials and workmanship.
For a home gym or garden recovery setup, this cold plunge arrives as one piece with the chiller already inside, so you fill it, plug it in and set your temperature instead of hauling bags of ice. The filtration and ozone system keeps the water fresh day to day, and the insulated acrylic shell suits a covered patio or a dedicated recovery room.
Does this cold plunge need a separate chiller installed?
No. The chiller is built into the tub, so the unit is one integrated piece. Fill it, connect power and set your temperature — there is no external refrigeration pack to mount or plumb, and no ice to add by hand.
How does the tub keep the water clean between users?
A circulating filtration loop runs the water through the system continuously, and an ozone purification system sanitizes it. Together they keep the plunge fresh and hygienic, which sharply reduces how often you have to drain and scrub compared with an open ice bath.
Can the cold plunge be used outdoors?
Yes. The insulated acrylic shell is rated for indoor or outdoor placement, and the chiller housing carries an IPX4 water-resistance rating. For a long service life, keep the chiller sheltered from standing rain even though it is splash-rated.
What are the power requirements for the chiller?
The unit runs on a 1 hp chiller drawing 24 A. Confirm your outlet's voltage and frequency before ordering, and specify your local supply so the correct configuration is set up for your region.
How does the shell hold the cold water temperature?
The body layers premium acrylic over resin, fiber and high-density polyurethane foam. That multi-layer insulation slows heat transfer, so the water stays cold longer and the chiller cycles less often, which lowers running costs.
Can the tub be customized for our facility?
Yes. Color, size and style can be customized. Share your required dimensions or reference images when you enquire and the manufacturer will prepare a solution to match your space.
Входит ли доставка в цену?
Для позиций со склада — всё, что можно добавить в спецификацию, — доставка входит в указанную цену. Для позиций под заказ доставка либо бесплатна (это отмечено на странице товара), либо считается при оформлении заказа, исходя из направления и объёма.
Сколько занимает доставка?
Позиции со склада обычно приходят за одну-три недели. Позиции под заказ — за три-шесть недель: мы работаем напрямую с производителями, и до отгрузки нужно время на производство и логистику. Закреплённый за вами менеджер подтверждает более точный срок после оформления заказа. Обратите внимание: за задержки при таможенном оформлении в стране назначения мы не отвечаем.
Входят ли пошлины и налоги на импорт?
В большинстве случаев да — мы стремимся отгружать на условиях DDP, то есть пошлины и импортные налоги улажены, и при получении с вас не потребуют доплат. В редких случаях отгрузка идёт на условиях DDU, когда импортные платежи вы вносите перевозчику напрямую, — но только по согласованию с вами заранее.
Есть ли гарантия на оборудование?
Да. На большую часть оборудования действует гарантия производителя от года до двух: она покрывает заводской брак и технические неисправности при нормальной эксплуатации, конкретный срок указан на странице товара. Если дефект проявился, мы организуем замену или возврат средств в соответствии с нашей Политикой обмена и возврата, а наша команда проведёт вас по обращению шаг за шагом.
