Commercial Ice Bath Chiller — 2HP Water Cooling System with Ozone Sterilization

A 2HP cold-plunge chiller that cools 50 L of water to 3°C in about four minutes, with adjustable temperature and built-in ozone sterilization.

À partir de69,490.00 ฿
Commande personnalisée
Fabriqué sur mesure selon votre cahier des charges : vous choisissez les dimensions et la configuration.

An ice bath chiller is a self-contained water cooling unit that drives cold plunge and cryotherapy recovery for athletes, gyms, physio clinics and recovery studios. This model runs a 2HP compressor with 5000 W of cooling capacity, so it pulls 50 L of water down to 3°C in roughly four minutes and holds any set point between 3°C and 42°C — useful for contrast therapy as well as straight cold plunges.

  • 5000 W cooling capacity on a 2HP compressor for fast recovery turnaround between clients.
  • Adjustable 3–42°C range covers cold plunge, cryotherapy and warm-water contrast sessions.
  • Ozone and UV sterilization plus an external filter keep plunge water clear without constant draining.
  • Self-priming circulation pump works with most ice bath tubs, so it drops into an existing setup.
  • Available in 220 V and 110 V, with overheat and overload protection for continuous commercial use.

For a home recovery setup, this chiller turns any tub into a temperature-controlled cold plunge without hauling bags of ice. Set it anywhere from 3°C to 42°C, and it cools 50 L of water to 3°C in about four minutes, then holds that temperature session after session. The ozone sterilization and external filter keep the water clear between plunges, and the self-priming pump connects to most ice bath tubs. It runs quietly enough for a garage or spare room and includes overheat and overload protection.

Caractéristiques techniques

Dimensions (L × l × H)
45 × 65 × 60 cm
Poids
62.0 kg
Puissance
1750 W
Tension
220 V / 110 V
Garantie
1.5-year manufacturer warranty
Personnalisation
OEM and ODM customization accepted
Cooling capacity
5000 W
Compressor
2HP
Refrigerant
R-410A / R-32
Working temperature range
3–42 (adjustable) °C
Usage environment
0–45 °C
Cooling performance
50 L to 3°C in ~4 min
Sterilization
Ozone generator + UV
Circulation pump
Self-priming electronic pump
Filter
External installation
Plug type
European plug
Protection
Overheat and overload

Questions fréquentes

How fast does this ice bath chiller cool the water?

It cools 50 L of water to 3°C in about four minutes, running a 2HP compressor with 5000 W of cooling capacity. After reaching the set point it holds that temperature, so the plunge stays cold through back-to-back sessions.

What temperature range can the chiller hold?

The set point is adjustable from 3°C to 42°C, which covers cold plunges, cryotherapy and warm-water contrast therapy. You dial in one temperature and the unit maintains it rather than cooling on and off.

Does the chiller keep the plunge water clean?

Yes. An ozone generator and UV sterilization treat the water, and an externally mounted filter removes hair and other impurities. Together they keep the water clear between plunges and cut down on how often you need to drain and refill.

Will this work with my existing ice bath tub?

The self-priming circulation pump draws from and returns to most ice bath tubs, so the chiller connects to a tub you already own. It sits beside the tub and cools the water externally rather than requiring a specific built-in basin.

Which voltage should I order, 110 V or 220 V?

The chiller is available in both 110 V and 220 V versions. Specify the voltage for your region when ordering so the unit ships with the correct configuration.

Is the chiller suitable for commercial gym or clinic use?

Yes. The 2HP compressor and overheat and overload protection are built for the continuous duty of a gym, physio clinic or recovery studio, where the unit runs through multiple clients a day. It's backed by a 1.5-year manufacturer warranty.

La livraison est-elle comprise dans le prix ?

Pour les articles en stock, c'est-à-dire tout ce que vous pouvez ajouter à la spécification, la livraison est comprise dans le prix affiché. Pour les articles fabriqués à la commande, elle est soit offerte (c'est indiqué sur la fiche produit), soit calculée au moment de la commande selon la destination et le volume.

Quels sont les délais de livraison ?

Comptez en général une à trois semaines pour un article en stock et trois à six semaines pour un article fabriqué à la commande : nous travaillons directement avec les fabricants, et la production comme la logistique prennent du temps avant l'expédition. Une fois la commande passée, votre interlocuteur dédié vous confirme un délai plus précis. Les retards liés au dédouanement dans le pays de destination ne relèvent pas de notre responsabilité.

Les droits de douane et taxes à l'importation sont-ils inclus ?

Dans la plupart des cas, oui : nous expédions de préférence en DDP (rendu droits acquittés), si bien que les droits et taxes à l'importation sont réglés et qu'aucun frais supplémentaire ne vous est demandé à la livraison. Il arrive, rarement, que nous expédiions en DDU (rendu droits non acquittés) : vous réglez alors les frais d'importation directement auprès du transporteur, et uniquement si nous en avons convenu avec vous à l'avance.

Vos produits sont-ils garantis ?

Oui. La plupart de nos équipements bénéficient d'une garantie constructeur d'un à deux ans, qui couvre les défauts de fabrication et les pannes techniques en utilisation normale ; la durée exacte figure sur chaque fiche produit. Si un défaut apparaît, nous organisons le remplacement ou le remboursement conformément à notre Politique d'échanges et de retours, et notre équipe vous accompagne pas à pas dans votre réclamation.

Demander un devis