Off-Grid Hybrid Solar Power System Kit with LiFePO4 Storage

Monocrystalline Mono PERC panels, an MPPT charge controller, a hybrid inverter and a LiFePO4 battery bank ship together, with roof mounting hardware in aluminium alloy and stainless steel. Wiring runs, conduit and the roof fixings themselves are site work.

Work backwards from daily kWh consumption and peak load, then pick an array between 1kW and 30kW with either 10kWh or 20kWh of storage. Pre-sales project design is included, so send your consumption figures and load list with the enquiry and the configuration is built around them.

Name the phase configuration — single-phase, split-phase or three-phase — plus output voltage of 110, 220, 230 or 240V and whether the site runs 50Hz or 60Hz. The inverter is built to that spec rather than switched on site.

Stated work time is 20 hours, but real backup depends on whether you took 10kWh or 20kWh and what stays connected. During daylight the hybrid inverter feeds loads straight from the array, so stored capacity is only drawn on after dark or during an outage.

LiFePO4 handles deep daily cycling far better than lead-acid, delivering more charge cycles and higher usable capacity — which matters in a system emptied and refilled every single day rather than held as standby.

IEC, CE and RoHS. Those cover the kit as supplied; local grid connection and electrical inspection requirements remain the installer's responsibility on site.

For in-stock items — anything you can add to the cart — shipping is included in the listed price. For made-to-order items, delivery is either free (marked on the product page) or calculated when you place your order, based on destination and volume.

In-stock items typically arrive within one to three weeks. Made-to-order items take three to six weeks, since we work directly with manufacturers and need time for production and logistics before shipping. Your assigned manager confirms a more precise estimate once your order is placed. Please note we can't be responsible for delays caused by customs clearance in the destination country.

In most cases, yes — we aim to ship Delivered Duty Paid (DDP), which means duties and import taxes are handled so you don't face extra charges on delivery. In rare cases we may ship Delivered Duty Unpaid (DDU), where you would settle import charges directly with the carrier — but only when agreed with you in advance.

Yes. Most of our equipment comes with a one-to-two-year manufacturer's warranty covering factory defects and technical faults under normal use; the specific term is stated on each product page. If a defect appears, we arrange a replacement or refund in line with our Exchange & Return Policy, and our team guides you through the claim step by step.