Facial Recognition Time Attendance Camera System — IP66 Outdoor

Weatherproof AI face-recognition terminal that logs employee clock-ins outdoors and runs access control from ready-made software.

From16,894.00 ฿
Thailand (THB)

Change currency

Prices follow the country you buy from. Pick a country to switch the currency.

Custom order
Made to order to your spec — you choose the size and configuration.

MOQ: 2

This is a face-recognition time and attendance terminal built for the entrance of a venue, not the back office. It reads faces at the door, matches each one against an onboard list and writes a timestamped clock-in or clock-out record, so a bar, kitchen or production floor can track who is on shift without cards, PINs or a supervisor at the desk. An IP66 rating means it mounts outside at a gate or service entrance and keeps working through rain and washdown.

The terminal holds a 10,000-person name list and 70,000 snapshot records on board, and it can detect and capture up to 32 faces at once — enough to clear a shift change without a queue. A 1/3" CMOS sensor feeds up to 2560×1440 video with 2D/3D noise reduction, and the unit carries a built-in mic and speaker for voice prompts and alarm playback. It connects over TCP/IP, RJ45 Ethernet or RS485, takes an SD card up to 256 GB for local recording, and ships with background software plus an API/SDK so an integrator can tie it into payroll, access control or a cloud dashboard.

  • IP66 housing rated for outdoor and washdown-area installation
  • Face capture, tracking, de-duplication and mask detection
  • Area-intrusion, tripwire and head-count behavior analysis for door security
  • Alarm I/O, motion and video-block alarms with sound-and-light linkage
  • Ready background software plus API/SDK for payroll and access-control integration

Specifications

Dimensions (L × W × H)
85 × 198 × 105 mm
Power
24 W
Voltage
DC 12V / 2A
Warranty
1-year manufacturer warranty with lifelong technical support
Certifications
FCC, CE
Customization
Ready background software plus API/SDK for custom integration
Biometric method
Face recognition
Sensor
1/3" CMOS
Max resolution
2560x1440
Name list capacity
10000 people
Snapshot records
70000
Simultaneous detection
32 targets
Protection rating
IP66, outdoor installation
Communication
RS485, TCP/IP, RJ45, audio in
Network interface
1x RJ45, 10/100M adaptive Ethernet
SD card support
Up to 256GB
Alarm interface
1 in / 1 out
Audio
1 RCA input / 1 RCA output, built-in mic and speaker
Noise reduction
2D/3D digital
Behavior analysis
Area invasion, tripwire, head count
Detection features
Face capture, tracking, de-duplication, enhancement, mask detection
Recording modes
Manual, timed, event, alarm

Frequently asked questions

Does this time attendance terminal work outdoors in the rain?

Yes. The housing carries an IP66 rating and is designed for outdoor installation, so it holds up at an exposed gate or service entrance and through washdown areas. Mount it under a small overhang where you can to shield the lens from direct rain and glare and keep recognition fast.

How many employees can the face recognition system store?

The terminal holds a 10,000-person name list and 70,000 snapshot recognition records on board, and it can detect and capture up to 32 faces at the same time. That headroom clears a full shift change at the door without people queuing to clock in.

What software and connections does the terminal need?

It ships with ready-to-run background software plus an API and SDK, so you can use it out of the box or integrate it with payroll, cloud management or access control. Connect over the 10/100M RJ45 Ethernet port, RS485, and add an SD card up to 256 GB for local recording.

Can it do more than clock employees in and out?

Yes. Alongside attendance it runs behavior analysis — area intrusion, tripwire crossing and head count — plus motion and video-block alarms with sound-and-light linkage, so the same unit works as an entrance security camera. A built-in mic and speaker handle voice prompts and alarm playback.

What voltage does the unit run on?

It runs on DC 12 V / 2 A with a tolerance of -15% to +10%. Plan for a stable 12 V supply at the install point; over longer cable runs, size the power lead so the voltage stays inside that window.

Is there a warranty on the device?

Backed by a 1-year manufacturer warranty, with lifelong technical support for setup and software integration questions.

Is shipping included in the price?

For in-stock items — anything you can add to the cart — shipping is included in the listed price. For made-to-order items, delivery is either free (marked on the product page) or calculated when you place your order, based on destination and volume.

How long does delivery take?

In-stock items typically arrive within one to three weeks. Made-to-order items take three to six weeks, since we work directly with manufacturers and need time for production and logistics before shipping. Your assigned manager confirms a more precise estimate once your order is placed. Please note we can't be responsible for delays caused by customs clearance in the destination country.

Are import duties and taxes included?

In most cases, yes — we aim to ship Delivered Duty Paid (DDP), which means duties and import taxes are handled so you don't face extra charges on delivery. In rare cases we may ship Delivered Duty Unpaid (DDU), where you would settle import charges directly with the carrier — but only when agreed with you in advance.

Do your products come with a warranty?

Yes. Most of our equipment comes with a one-to-two-year manufacturer's warranty covering factory defects and technical faults under normal use; the specific term is stated on each product page. If a defect appears, we arrange a replacement or refund in line with our Exchange & Return Policy, and our team guides you through the claim step by step.

Request a quote