Electric Storage Water Heater — Enamel Tank, 10–100 L

Name: Electric Storage Water Heater — Enamel Tank, 10–100 L
Brand: BarEquip.Pro
SKU: BEP-0745
Price: 3811.0 THB
Availability: BackOrder

Wall-mounted electric storage water heater with an enamel inner tank, available from 10 to 100 liters for showers and washrooms.

From3,811.00 ฿

Custom order

Made to order to your spec — you choose the size and configuration.

This is a wall-mounted electric storage water heater built for venues that need steady hot water on tap — hotel bathrooms, staff washrooms, kitchen sinks, and mixed-use sites from garages to RV hookups. It holds water in an enamel inner tank and reheats on demand, so the fixture it feeds gets a consistent supply without a separate boiler room. The range spans 10 to 100 liters, letting you match tank size to how many outlets and how much draw each installation carries.

Heating runs through a dual-tube element that can work one tube at a time for lighter loads or both for faster recovery, and the temperature control holds output within a tight band once the tank is up to temperature. A fluorine-free polyurethane foam layer keeps stored water hot between draws, which cuts how often the element cycles back on.

Enamel inner tank, wall-mounted plastic housing
Power rated 1600 W or 2200 W depending on tank size
Class A energy efficiency rating
T&P pressure relief valve, anti-dry-burn cut-off, and three-pole power cut-off for poorly grounded buildings
80 °C pasteurization cycle and anti-scaling function

For a home bathroom or kitchen, this electric storage water heater mounts to the wall and holds heated water ready for the next shower or wash-up. Smaller 10–20 L tanks suit a single sink or a compact flat, while the larger sizes cover a full bathroom. Safety features carry over to household use: the pressure relief valve guards against tank over-pressure, the anti-dry-burn cut-off protects the element if the tank runs low, and the three-pole cut-off adds a margin in older wiring. An 80 °C pasteurization cycle helps keep stored water clean between uses.

Specifications

Material: Enamel inner tank, Plastic housing
Warranty: 1 Year
Certifications: Declaration of Conformity, LVD, CE, CCC, EMC
Capacity range: 10/15/20/30/50/80/100 L
Power: 1600 / 2200 W
Energy efficiency rating: Class A
Installation: Wall-mounted
Power source: Electric
Heating structure: Dual-tube separate heating
Insulation: Fluorine-free polyurethane foam
T&P pressure relief: 0.75–0.8 MPa
Pasteurization: 80 °C
App-controlled: No
Operating language: English

Frequently asked questions

What tank sizes does this water heater come in?

The range runs from 10 to 100 liters — 10, 15, 20, 30, 50, 80, and 100 L. Smaller tanks suit a single sink or compact bathroom, while 80 and 100 L cover a full bathroom or a busier washroom. Choose the size by how many outlets it feeds and how much hot water you draw at once.

How much power does the heater draw?

Power is rated at 1600 W or 2200 W depending on the tank size. The dual-tube element can run one tube for lighter loads to save energy or both tubes together for faster recovery when demand is higher. It carries a Class A energy efficiency rating.

What safety protections are built in?

A T&P pressure relief valve releases pressure automatically when it exceeds roughly 0.75–0.8 MPa to protect the tank. An anti-dry-burn thermostat cuts power when the tank is empty or nearly empty. A three-pole cut-off disconnects live, neutral, and ground on detecting leakage, which helps in older buildings with weak grounding.

How is the inner tank protected against corrosion and scale?

The inner tank is enamel-lined, which resists corrosion from stored water. The unit also runs an 80 °C pasteurization cycle and an anti-scaling function to help keep the water clean and slow mineral buildup over time.

How long does the tank keep water hot without power?

A high-density, fluorine-free polyurethane foam layer insulates the tank, so stored water stays hot for an extended period between draws and the element cycles on less often. Real retention depends on tank size, ambient temperature, and starting water temperature.

Where can this water heater be installed?

It is wall-mounted and designed for indoor and semi-outdoor use — home bathrooms and kitchens, hotel rooms, staff washrooms, garages, and RVs. Confirm your local voltage and plumbing connections when ordering to match the unit to your site.

Is shipping included in the price?

For in-stock items — anything you can add to the cart — shipping is included in the listed price. For made-to-order items, delivery is either free (marked on the product page) or calculated when you place your order, based on destination and volume.

How long does delivery take?

In-stock items typically arrive within one to three weeks. Made-to-order items take three to six weeks, since we work directly with manufacturers and need time for production and logistics before shipping. Your assigned manager confirms a more precise estimate once your order is placed. Please note we can't be responsible for delays caused by customs clearance in the destination country.

Are import duties and taxes included?

In most cases, yes — we aim to ship Delivered Duty Paid (DDP), which means duties and import taxes are handled so you don't face extra charges on delivery. In rare cases we may ship Delivered Duty Unpaid (DDU), where you would settle import charges directly with the carrier — but only when agreed with you in advance.

Do your products come with a warranty?

Yes. Most of our equipment comes with a one-to-two-year manufacturer's warranty covering factory defects and technical faults under normal use; the specific term is stated on each product page. If a defect appears, we arrange a replacement or refund in line with our Exchange & Return Policy, and our team guides you through the claim step by step.

Electric Storage Water Heater — Enamel Tank, 10–100 L

Specifications

Frequently asked questions

Tags