Professional 2U Class D Power Amplifier — 2x1500W, Stereo/Bridge/Parallel

A 2U Class D power amplifier delivering up to 5200W bridged, with XLR and Speakon connectivity and full multi-stage protection.

$ 964 $ 1 128 14% discount
Shipping calculated separately
Lead time: 2–4 weeks

MOQ: 2

This 2U rack power amplifier drives the loudspeakers in a fixed install or touring rig — the link between the mixer and the PA. Its Class D output stage delivers 1500W per channel into 8Ω and 2200W per channel into 4Ω in stereo, rising to 5200W when bridged into a 4Ω subwoofer load, so one chassis can anchor a mid-size room, a multi-zone venue, or a stage.

Three operating modes cover most signal-routing needs: STEREO for independent left/right channels, PARALLEL to feed both outputs from one input, and BRIDGE to combine channels for high-power mono. Balanced XLR inputs and a choice of XLR or 4-pole Speakon outputs let it integrate cleanly into existing patch panels. Front-panel indicators report power, signal, compression, and clipping at a glance.

  • Frequency response 20Hz–20kHz (±0.5dB) with a signal-to-noise ratio above 108dB
  • Damping factor above 900 at 1kHz/8Ω for tight low-end control
  • Layered protection: AC/DC, clipping limiter, short-circuit, thermal, overload, and surge suppression
  • Two temperature-controlled variable-speed fans, front-to-back airflow
  • Universal AC 110–240V supply, factory-configurable

Backed by a 3-year manufacturer warranty.

Specifications

Material
Metal
Color
Black
Dimensions (L × W × H)
345 × 483 × 88.6 mm
Weight
20.0 kg
Power
5200 W
Voltage
AC 110-240V, 50/60Hz
Warranty
3 years
Certifications
CCC, CQC
Output power (stereo, 8O, <=1% THD)
2 x 1500 W
Output power (stereo, 4O, <=1% THD)
2 x 2200 W
Output power (stereo, 2O, <=1% THD)
2 x 2800 W
Output power (bridged, 8O, <=1% THD)
4200 W
Output power (bridged, 4O, <=1% THD)
5200 W
Output circuit topology
Class D
Operating modes
Stereo, Parallel, Bridge
Rack size
2U
Inputs
Female 3-pin XLR x 2
Outputs
Male 3-pin XLR x 2, 4-pole Speakon x 2
Input impedance
20kO balanced
Input sensitivity
+2.2dBu (1.0Vrms)
Maximum input level
+22.0dBu (10.0Vrms)
Frequency response
20Hz-20kHz (+/-0.5dB)
Signal-to-noise ratio
>=108 dB
THD (half power, 20Hz-20kHz)
0.07 %
Intermodulation distortion
0.02 %
Damping factor (1kHz, 8O)
>=900
Slew rate
>=60 V/us
Front-panel indicators
Power, signal, compression, clipping
Cooling
2 DC temperature-controlled variable-speed fans, front-to-back airflow

Frequently asked questions

How much power does this amplifier deliver per channel?

In stereo it delivers 1500W per channel into 8Ω and 2200W per channel into 4Ω, both at no more than 1% THD. Bridged to mono, it produces 4200W into 8Ω and 5200W into 4Ω, so a single chassis can drive a subwoofer or a high-SPL main system.

What input and output connectors does it use?

Inputs are two balanced female 3-pin XLR connectors. Outputs are two male 3-pin XLR plus two 4-pole Speakon connectors, letting it tie into existing patch panels and speaker harnesses without adapters.

What is the difference between stereo, parallel, and bridge modes?

STEREO runs the two channels independently for left and right. PARALLEL drives both channels from a single input, useful for redundancy or wider coverage. BRIDGE combines both channels into one high-power mono output for demanding loads such as subwoofers.

Will this amplifier run on my mains voltage?

It accepts a universal AC 110-240V supply at 50/60Hz, factory-configurable for the destination grid. Confirm your required voltage when ordering so it ships set up correctly.

How does it stay cool and protected during long events?

Two DC temperature-controlled variable-speed fans move air from front to back, and a full protection suite covers AC/DC faults, clipping, high frequencies, short circuits, thermal overload, overload, and surges. The amplifier is backed by a 3-year manufacturer warranty.

Is shipping included in the price?

For in-stock items — anything you can add to the cart — shipping is included in the listed price. For made-to-order items, delivery is either free (marked on the product page) or calculated when you place your order, based on destination and volume.

How long does delivery take?

In-stock items typically arrive within one to three weeks. Made-to-order items take three to six weeks, since we work directly with manufacturers and need time for production and logistics before shipping. Your assigned manager confirms a more precise estimate once your order is placed. Please note we can't be responsible for delays caused by customs clearance in the destination country.

Are import duties and taxes included?

In most cases, yes — we aim to ship Delivered Duty Paid (DDP), which means duties and import taxes are handled so you don't face extra charges on delivery. In rare cases we may ship Delivered Duty Unpaid (DDU), where you would settle import charges directly with the carrier — but only when agreed with you in advance.

Do your products come with a warranty?

Yes. Most of our equipment comes with a one-to-two-year manufacturer's warranty covering factory defects and technical faults under normal use; the specific term is stated on each product page. If a defect appears, we arrange a replacement or refund in line with our Exchange & Return Policy, and our team guides you through the claim step by step.

Request a quote

Professional 2U Class D Power Amplifier — 2x1500W, Stereo/Bridge/Parallel

Professional 2U Class D Power Amplifier — 2x1500W, Stereo/Bridge/Parallel

$ 964

Tell us where to ship — we'll get back to you with a price including delivery.

Book a consultation

Tell us what you're outfitting and we'll come back with the right kit, pricing and lead times.

WhatsApp number