Cold Plunge Water Chiller with Ozone & UV Sanitation
A self-contained ice-bath chiller with a built-in pump, filter, and ozone/UV sanitation for cold plunges in any tub or pool.
Desde34,998.00 ฿
Pedido personalizado
Se fabrica según sus requisitos: usted elige el tamaño y la configuración.
A cold plunge chiller cools the water in an existing tub or plunge pool and holds it at a set temperature, so a gym, spa, or recovery studio can offer consistent ice baths without hauling ice. The unit circulates and chills the water through its own loop, which keeps the plunge ready between clients and removes the daily cost and mess of bagged ice.
Everything needed to run sits inside the cabinet, so installation is a matter of connecting the hoses rather than plumbing a separate system:
Built-in circulating pump — no external pump to source or wire
Built-in water filter plus ozone or UV sanitation to keep the water clear between changes
Water-and-electricity separation with leakage-current protection
IPX5 rating for indoor or outdoor placement
Wi-Fi control for setting temperature and monitoring remotely
Cooling output is offered across several compressor sizes, from a tub-scale unit up to 2 HP, so you can match the chiller to the water volume and the recovery time you want to hit. The compressor runs on R-410A or R-32 refrigerant and works in ambient temperatures from 0 to 45 °C.
For a home cold plunge, this chiller does the work an ice delivery used to: it cools your own tub or barrel and holds the temperature, so the water is ready whenever you want to get in. The pump, filter, and ozone or UV sanitation are all built into one cabinet, so setup is connecting a couple of hoses rather than building a system, and the water stays clean between changes.
With an IPX5 rating it sits indoors or out on a patio, and Wi-Fi control lets you set the temperature from your phone. Choose a smaller output for a single barrel or a larger compressor if you want a bigger tub to cool quickly.
Ficha técnica
Peso
40.0 kg
Potencia
900 W
Tensión
110 V / 220 V
Garantía
1-year manufacturer warranty, including core components
Will this chiller work with my existing bathtub or pool?
Yes. The chiller connects to a tub, barrel, or plunge pool you already have rather than requiring a dedicated vessel. It circulates water from the tub through its own loop, cools it, and returns it, so most tubs and pools work as long as you can run the supply and return hoses.
How do I choose the right cooling capacity for my tub?
Match the compressor size to three things: the water volume in your tub or pool, the water temperature before and after cooling, and how fast you want it to reach the target. A tub-scale unit suits a single barrel, while 1–2 HP models cool larger volumes faster. Share your water volume and target temperature when ordering and the team can recommend a size.
Does the chiller keep the water clean on its own?
It has a built-in water filter plus a sanitation stage — either a Philips UV lamp or an ozone generator depending on the configuration — that helps control water quality between changes. It reduces how often you refill, though it does not replace draining and refilling the tub periodically.
Can I install this chiller outdoors?
Yes. The unit carries an IPX5 rating, so it can sit indoors or outdoors against water jets. It also includes water-and-electricity separation and leakage-current protection, which matter when a cooling appliance runs near a water tub.
What voltage and plug type does it ship with?
The chiller is available in 110 V and 220 V versions. Specify your voltage, frequency, and country when ordering so it ships with the correct plug for your region.
Does it need a separate pump or extra plumbing?
No. A water circulating pump is built into the cabinet, so you do not need to buy or wire an external pump. Setup is mainly connecting the supply and return hoses between the chiller and your tub.
¿El envío está incluido en el precio?
En los artículos en stock —todo lo que se puede añadir al carrito— el envío está incluido en el precio indicado. En los artículos fabricados bajo pedido, la entrega es gratuita (se indica en la ficha del producto) o se calcula al hacer el pedido según el destino y el volumen.
¿Cuánto tarda la entrega?
Los artículos en stock suelen llegar en una a tres semanas. Los fabricados bajo pedido tardan de tres a seis semanas, porque trabajamos directamente con los fabricantes y hace falta tiempo para la producción y la logística antes del envío. Su gestor asignado le confirma un plazo más preciso una vez hecho el pedido. Tenga en cuenta que no podemos responder de los retrasos debidos al despacho de aduanas en el país de destino.
¿Están incluidos los aranceles e impuestos de importación?
En la mayoría de los casos, sí: procuramos enviar con derechos pagados (DDP), es decir, los aranceles y los impuestos de importación quedan gestionados y no tendrá cargos adicionales en la entrega. En casos excepcionales podemos enviar con derechos no pagados (DDU), y entonces usted liquida los cargos de importación directamente con el transportista, pero solo si lo acordamos antes con usted.
¿Los productos tienen garantía?
Sí. La mayor parte de nuestro equipamiento tiene una garantía del fabricante de uno a dos años que cubre defectos de fábrica y averías técnicas con un uso normal; el plazo concreto figura en cada ficha de producto. Si aparece un defecto, organizamos la sustitución o el reembolso conforme a nuestra Política de cambios y devoluciones, y nuestro equipo le acompaña en la reclamación paso a paso.
