Kintex UltraScale FPGA Development Board — XCKU040, 4 GB DDR4
A Kintex UltraScale XCKU040 development board with 4 GB DDR4, three FMC sites, SFP+ and Gigabit Ethernet for high-speed prototyping.
58,429.00 ฿
Tailandia (THB)
–
Envío calculado aparte
Plazo de entrega: 2–4 semanas
The AXKU041 is a development board built around the AMD Kintex UltraScale XCKU040-2FFVA1156 FPGA, aimed at engineering teams prototyping high-speed logic, signal processing and data-acquisition designs. It pairs the FPGA with four 1 GB DDR4 chips (64-bit bus, 2400 Mbps) and 128 Mbit QSPI flash for user data, so a design has both working memory and non-volatile storage on board from day one.
Connectivity is where this board earns its place on the bench. It carries three FMC expansion sites and a mix of serial and network interfaces, which lets a lab add daughter cards for ADC/DAC, camera or custom I/O without redesigning the carrier.
FPGA: AMD Kintex UltraScale XCKU040-2FFVA1156
Memory: four 1 GB DDR4 (64-bit bus, 2400 Mbps) plus 128 Mbit QSPI flash
Expansion: 2× FMC LPC and 1× FMC HPC
High-speed I/O: SFP+ up to 12.5 Gb/s, PCIe, 10/100/1000M Ethernet (RJ-45)
Debug: 10-pin 0.1-inch standard JTAG port; on-board LM75 temperature sensor
It suits R&D labs, universities and hardware startups that need a ready carrier for UltraScale development rather than spinning their own board.
Ficha técnica
FPGA chip
AMD Kintex UltraScale XCKU040-2FFVA1156
DDR4 memory
Four 1 GB, 64-bit bus, 2400 Mbps
QSPI flash
128 Mbit
SFP+ data rate
12.5 Gb/s
FMC expansion
2× FMC LPC, 1× FMC HPC
Ethernet
10/100/1000M, RJ-45
PCIe interface
Yes
Analog interface
External high-speed input/output signals
JTAG
10-pin 0.1-inch standard port
Temperature sensor
LM75
Preguntas frecuentes
Which FPGA does the AXKU041 board use?
It is built around the AMD Kintex UltraScale XCKU040-2FFVA1156. The board acts as a complete carrier for this device, so you develop against the UltraScale fabric without designing your own board.
How much memory is on the board?
Four 1 GB DDR4 chips give 4 GB total on a 64-bit bus running at 2400 Mbps, plus a 128 Mbit QSPI flash used for FPGA user data storage and configuration.
What expansion and high-speed interfaces are available?
Three FMC sites — two LPC and one HPC — accept mezzanine cards for ADC/DAC, imaging or custom I/O. The board also provides an SFP+ interface rated up to 12.5 Gb/s, a PCIe interface and a 10/100/1000M Ethernet port on RJ-45.
How is the board programmed and debugged?
A 10-pin 0.1-inch standard JTAG port handles program download and debug. An on-board LM75 sensor also reports the temperature around the board during operation.
Who is this development board for?
It targets R&D labs, universities and hardware teams prototyping high-speed logic, signal processing and data-acquisition designs who want a ready UltraScale carrier rather than building one.
¿El envío está incluido en el precio?
En los artículos en stock —todo lo que se puede añadir al carrito— el envío está incluido en el precio indicado. En los artículos fabricados bajo pedido, la entrega es gratuita (se indica en la ficha del producto) o se calcula al hacer el pedido según el destino y el volumen.
¿Cuánto tarda la entrega?
Los artículos en stock suelen llegar en una a tres semanas. Los fabricados bajo pedido tardan de tres a seis semanas, porque trabajamos directamente con los fabricantes y hace falta tiempo para la producción y la logística antes del envío. Su gestor asignado le confirma un plazo más preciso una vez hecho el pedido. Tenga en cuenta que no podemos responder de los retrasos debidos al despacho de aduanas en el país de destino.
¿Están incluidos los aranceles e impuestos de importación?
En la mayoría de los casos, sí: procuramos enviar con derechos pagados (DDP), es decir, los aranceles y los impuestos de importación quedan gestionados y no tendrá cargos adicionales en la entrega. En casos excepcionales podemos enviar con derechos no pagados (DDU), y entonces usted liquida los cargos de importación directamente con el transportista, pero solo si lo acordamos antes con usted.
¿Los productos tienen garantía?
Sí. La mayor parte de nuestro equipamiento tiene una garantía del fabricante de uno a dos años que cubre defectos de fábrica y averías técnicas con un uso normal; el plazo concreto figura en cada ficha de producto. Si aparece un defecto, organizamos la sustitución o el reembolso conforme a nuestra Política de cambios y devoluciones, y nuestro equipo le acompaña en la reclamación paso a paso.