All-in-One Commercial Cold Plunge Tub with Built-In Chiller
A freestanding acrylic cold plunge with an integrated chiller, ozone sanitation and self-cleaning filtration — ready to run straight out of the crate.
Desde133,440.00 ฿
Pedido personalizado
Se fabrica según sus requisitos: usted elige el tamaño y la configuración.
The All-in-One Commercial Cold Plunge Tub is a freestanding recovery bath with the chiller built into the unit, so a gym, spa or recovery studio can place it, fill it and run cold therapy sessions without plumbing in a separate refrigeration pack. The 1 hp chiller pulls water down and holds it at a set temperature, which means staff never add ice or chase the temperature between clients.
Water stays clear between uses because the tub circulates through its own filtration loop and an ozone sanitation system, cutting the daily draining and scrubbing that open ice baths demand. The shell is acrylic over resin, fiber and high-density polyurethane foam, so the water holds its temperature longer and the chiller cycles less often. Patented spray and return ports keep the circulation even across the basin.
Built-in 1 hp chiller — no external refrigeration unit to install
Ozone sanitation plus circulating filtration for low-maintenance water care
Insulated multi-layer acrylic shell rated for indoor or outdoor placement
IPX4 chiller housing for sheltered outdoor installs
Center drain, 15 gpm minimum flow, 24 A / 1 hp power draw
Backed by a 1-year manufacturer warranty against defects in materials and workmanship.
For a home gym or garden recovery setup, this cold plunge arrives as one piece with the chiller already inside, so you fill it, plug it in and set your temperature instead of hauling bags of ice. The filtration and ozone system keeps the water fresh day to day, and the insulated acrylic shell suits a covered patio or a dedicated recovery room.
Does this cold plunge need a separate chiller installed?
No. The chiller is built into the tub, so the unit is one integrated piece. Fill it, connect power and set your temperature — there is no external refrigeration pack to mount or plumb, and no ice to add by hand.
How does the tub keep the water clean between users?
A circulating filtration loop runs the water through the system continuously, and an ozone purification system sanitizes it. Together they keep the plunge fresh and hygienic, which sharply reduces how often you have to drain and scrub compared with an open ice bath.
Can the cold plunge be used outdoors?
Yes. The insulated acrylic shell is rated for indoor or outdoor placement, and the chiller housing carries an IPX4 water-resistance rating. For a long service life, keep the chiller sheltered from standing rain even though it is splash-rated.
What are the power requirements for the chiller?
The unit runs on a 1 hp chiller drawing 24 A. Confirm your outlet's voltage and frequency before ordering, and specify your local supply so the correct configuration is set up for your region.
How does the shell hold the cold water temperature?
The body layers premium acrylic over resin, fiber and high-density polyurethane foam. That multi-layer insulation slows heat transfer, so the water stays cold longer and the chiller cycles less often, which lowers running costs.
Can the tub be customized for our facility?
Yes. Color, size and style can be customized. Share your required dimensions or reference images when you enquire and the manufacturer will prepare a solution to match your space.
¿El envío está incluido en el precio?
En los artículos en stock —todo lo que se puede añadir al carrito— el envío está incluido en el precio indicado. En los artículos fabricados bajo pedido, la entrega es gratuita (se indica en la ficha del producto) o se calcula al hacer el pedido según el destino y el volumen.
¿Cuánto tarda la entrega?
Los artículos en stock suelen llegar en una a tres semanas. Los fabricados bajo pedido tardan de tres a seis semanas, porque trabajamos directamente con los fabricantes y hace falta tiempo para la producción y la logística antes del envío. Su gestor asignado le confirma un plazo más preciso una vez hecho el pedido. Tenga en cuenta que no podemos responder de los retrasos debidos al despacho de aduanas en el país de destino.
¿Están incluidos los aranceles e impuestos de importación?
En la mayoría de los casos, sí: procuramos enviar con derechos pagados (DDP), es decir, los aranceles y los impuestos de importación quedan gestionados y no tendrá cargos adicionales en la entrega. En casos excepcionales podemos enviar con derechos no pagados (DDU), y entonces usted liquida los cargos de importación directamente con el transportista, pero solo si lo acordamos antes con usted.
¿Los productos tienen garantía?
Sí. La mayor parte de nuestro equipamiento tiene una garantía del fabricante de uno a dos años que cubre defectos de fábrica y averías técnicas con un uso normal; el plazo concreto figura en cada ficha de producto. Si aparece un defecto, organizamos la sustitución o el reembolso conforme a nuestra Política de cambios y devoluciones, y nuestro equipo le acompaña en la reclamación paso a paso.
