Wireless Fixed Gas Detector — Battery-Powered, Magnetic Mount, LoRa/NB-IoT/4G
Cabling-free fixed gas detector with magnetic mounting and LoRa/NB-IoT/4G upload for continuous leak monitoring in hazardous areas.
Desde15,532.00 ฿
Pedido personalizado
Se fabrica según sus requisitos: usted elige el tamaño y la configuración.
A fixed gas detector built for sites where running power and signal cable is slow, costly or impossible. It mounts magnetically and runs on its own lithium battery pack, so you can position it at a CNG station, a flammable-gas store or a remote compressor skid and have it reporting within minutes instead of waiting on a wiring crew. The infrared sensor watches for combustible gases — methane, propane, isobutane — and triggers a combined sound-and-light alarm on site while pushing readings back over LoRa, NB-IoT or 4G.
The point of the wireless design is retrofit speed: no conduit, no cable trays, no trenching, which the manufacturer puts at up to 70% off the install cost of a comparable wired loop. Each unit interval-samples to stretch battery life, so a facility can cover many points without a single external power run. Paired with centralized monitoring software, a safety team sees every field node on one screen, with anomaly alerts, historical logs and cloud backup.
Magnetic, cabling-free install for fast retrofits in live facilities
Battery operation (2× 19000 mAh lithium thionyl chloride) for areas without power access
LoRa / NB-IoT / 4G upload to suit remote or dense urban sites
Infrared sensing with ±3% FS accuracy across a 3–100% LEL range
On-unit sound-and-light alarm for immediate local warning
Rated for -25 °C to +55 °C and 20–93% relative humidity, and carried by a 2-year manufacturer warranty.
Ficha técnica
Material
Metal
Tensión
DC 3.6 V (battery)
Garantía
2 years
Certificaciones
SIL, FCC, CE, RoHS, CCC
Personalización
OEM, ODM, OBM
Sensor type
Infrared
Detected gases
Methane, propane, isobutane
Measurement range
3–100 %LEL
Accuracy
±3 %FS
Alarm mode
Sound + light
Mounting
Magnetic
Power source
Battery powered
Battery
2× lithium thionyl chloride 19000 mAh (parallel)
Wireless connectivity
LoRa / NB-IoT / 4G
Data upload
Interval collection, wireless upload
Operating temperature
-25 to +55 °C
Relative humidity
20–93 %
Preguntas frecuentes
Does this gas detector need to be wired for power?
No. It runs on an internal lithium thionyl chloride battery pack (two 19000 mAh cells in parallel) and mounts magnetically, so there is no need for mains power or signal cabling. That is what makes it suited to hazardous areas and remote points where power access is restricted.
How does the detector send readings back to a monitoring system?
It uploads wirelessly over LoRa, NB-IoT or 4G, collecting samples at intervals to conserve battery. The data feeds centralized monitoring software, which gives real-time readings across multiple field sites, automated anomaly alerts, historical analysis and cloud backup.
Which gases does the infrared sensor detect?
The infrared sensor targets combustible gases — methane, propane and isobutane — across a 3–100% LEL range with ±3% FS accuracy. On a reading above threshold it fires a combined sound-and-light alarm at the unit.
What measurement range should I choose when ordering?
Select the variant that matches the gas concentration you need to watch. Ranges run from 0–50 ppm for low-threshold monitoring up to 0–10000 ppm for higher concentrations; specify the ppm range you need when ordering.
What conditions can the detector operate in?
It is rated for -25 °C to +55 °C and 20–93% relative humidity, with a metal housing built for harsh industrial settings such as CNG stations and flammable-gas storage. It carries a 2-year manufacturer warranty.
How much install time does the magnetic mount save?
Because there is no conduit, cable tray or trenching, the manufacturer puts the saving at up to 70% of labor and material versus a comparable wired system, which makes it practical to retrofit detection points into a facility that is already running.
¿El envío está incluido en el precio?
En los artículos en stock —todo lo que se puede añadir al carrito— el envío está incluido en el precio indicado. En los artículos fabricados bajo pedido, la entrega es gratuita (se indica en la ficha del producto) o se calcula al hacer el pedido según el destino y el volumen.
¿Cuánto tarda la entrega?
Los artículos en stock suelen llegar en una a tres semanas. Los fabricados bajo pedido tardan de tres a seis semanas, porque trabajamos directamente con los fabricantes y hace falta tiempo para la producción y la logística antes del envío. Su gestor asignado le confirma un plazo más preciso una vez hecho el pedido. Tenga en cuenta que no podemos responder de los retrasos debidos al despacho de aduanas en el país de destino.
¿Están incluidos los aranceles e impuestos de importación?
En la mayoría de los casos, sí: procuramos enviar con derechos pagados (DDP), es decir, los aranceles y los impuestos de importación quedan gestionados y no tendrá cargos adicionales en la entrega. En casos excepcionales podemos enviar con derechos no pagados (DDU), y entonces usted liquida los cargos de importación directamente con el transportista, pero solo si lo acordamos antes con usted.
¿Los productos tienen garantía?
Sí. La mayor parte de nuestro equipamiento tiene una garantía del fabricante de uno a dos años que cubre defectos de fábrica y averías técnicas con un uso normal; el plazo concreto figura en cada ficha de producto. Si aparece un defecto, organizamos la sustitución o el reembolso conforme a nuestra Política de cambios y devoluciones, y nuestro equipo le acompaña en la reclamación paso a paso.
